Chapter 8 : Connecting External Devices; Connecting External Monitors - Sony PXW-X320 Operating Instructions Manual

8 Connecting External Devices
Chapter
You can connect a control device such as an RM-B170/B750 Remote Control Unit or RCP-1001/1501
Remote Control Panel and operate this camcorder. For details about connection and operation of the
control device, see "Operating via the REMOTE Connector" (page 66).

Connecting External Monitors

Select the output signal and use an appropriate cable for the monitor to be connected.
Regardless of whether the signal is HD or SD, the
same status information and menus can be
displayed on the external monitor as those on the
viewfinder screen.
BNC cable
(not supplied)
HDMI cable (not supplied)
BNC cable (not supplied)
171
Note
SD signals down-converted for output have the
following restrictions.
Images of 50P/50i/25P are output as PAL signals, those
of 59.94P/59.94i/29.97P are output as NTSC signals, and
those of 23.98P are output as 2-3 pulled-down NTSC
signals.