Intel Pentium OverDrive Installation Manual page 16

Step 8—Start your computer and run your
computer's setup program.
Put the cover back on the system unit. Reconnect all the cables and cords, and
plug the power cord into the wall outlet.
Turn on your computer. If your computer requires it, run the computer's setup
or configuration program. Refer to your computer owner's manual.
If you have problems with your computer after installing the Pentium
OverDrive processor, turn to Troubleshooting, p. 19.
If your system requires setting jumpers or switches,
refer to your computer owner's manual or the Trouble-
shooting section, p. 25.
16