Remove The Full-Length Expansion Board - HP ProLiant DL388p User Manual

Remove the fan.
3.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
IMPORTANT:
information, refer to the fan locations table
To replace the component, reverse the removal procedure.

Remove the full-length expansion board

CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
To remove the component:
Power down the server (on page 21).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 21).
3.
Remove the access panel (on page 22).
4.
Do not operate the server for long periods with the access panel open or removed.
For optimum cooling, install fans in all primary fan locations. For more
To prevent damage to the server or expansion boards, power down the server and
("Hot-plug fans" on page 19).
Operations 26