Remove the hard drive cage.
7.
To replace the component, reverse the removal procedure.
Full-length expansion board shipping bracket
CAUTION:
remove all AC power cords before removing or installing the PCI riser cage.
Power down the server (on page 26).
1.
Extend the server from the rack (on page 27).
2.
Remove the access panel
3.
Remove the full-length expansion board shipping bracket:
4.
If no full-length expansion boards are installed, remove the full-length expansion board shipping
o
bracket as indicated.
To prevent damage to the server or expansion boards, power down the server and
("Access
panel" on page 33).
Removal and replacement procedures 42