Jumper Location - Advantech ARK-7480 User Manual

The jumper settings are schematically depicted in this manual as follows:
pair of needle-nose pliers may be helpful when working with jumpers. If
you have any doubts about the best hardware configuration for your appli-
cation, contact your local distributor or sales representative before you
make any changes.

3.3 Jumper Location

The ARK-7480 Embedded Box Computer has a number of jumpers inside
the chassis that allow you to configure your system to suit your application.
The table below lists the functions of the various jumpers.
Table 3.1: Jumpers
Jumper No
JP1
JP3
JP4
JP5
Figure 3.1: Jumper Location of internal SBC board of ARK-7480
Function
COM1~ COM6 Ring / Voltage Setting
Clear CMOS
LVDS/LCD Power Setting
COM2 RS-232/422/485 Setting
J P 1
J P 5
21
J P 3
J P 4
A
Chapter 3