Save & Exit Setup; Exit Without Saving - Advantech ARK-7480 User Manual

All-in-one, high performance, embedded box computer

Table of Contents

Please Confirm Your Password

Enter the current password and press <Enter>.

3. After pressing <Enter> (ROM password) or the current password(user-

defined), you can change the password stored in the CMOS. The pass-

word must be no longer than eight (8) characters. Remember, to enable

the password setting feature, you must first select either "Setup" or "Sys-

tem" from the "Advanced BIOS Features" menu.

4.12 Save & Exit Setup

If you select this and press <Enter>, the values entered in the setup utili-

ties will be recorded in the CMOS memory of the chipset. The micropro-

cessor will check this every time you turn your system on and compare

this to what it finds as it checks the system. This record is required for the

system to operate.

Selecting this option and pressing <Enter> lets you exit the setup program

without recording any new values or changing old ones.

Chapter 4

Table of Contents