Usb Connectors (Usb1 ~ Usb6) - Advantech ARK-7480 User Manual

5
6
7
8
9
10
11
12
13
14
15
Note: NC represents "No Connection"

2.2.13 USB Connectors (USB1 ~ USB6)

The ARK-7480 provides up to six connectors (please refer to Section
1.3.7), which gives complete Plug & Play and hot swapping for up to 127
external devices. The USB interface complies with USB UHCI, Rev. 2.0
compliant. The USB interface can be disabled in the system BIOS setup.
The USB connector is used for connecting any device that conforms to
the USB interface. Many recent digital devices conform to this standard.
The USB interface supports Plug and Play, which enables you to connect
or disconnect a device whenever you want, without turning off the com-
puter.
Table 2.12: Table 2.14 USB Connector
Pin
1
2
3
4
Note: NC represents "No Connection"
ARK-7480 User Manual
GND
GND
GND
GND
NC
GND
NC
DDC_DATA
H-SYNC
V-SYNC
DDC_CLK
Figure 2.12: USB connector
Signal name
VCC
USB_P0-
USB_P0+
GND
18