Lvds Connector - Advantech ARK-7480 User Manual

2.2.8 LVDS Connector

The ARK-7480 comes with a D-Sub 26-pin connector that carries LVDS
signal output, and can direct connect to a 36-bit of LVDS LCD Display
via external cable.
The system also provides a jumper for JP4 on internal ARK-7480 moth-
erboard for selecting the LCD signal power of 5V or 3.3V, please refer to
section 3.3 of Chapter 3 for the jumper table for JP4 setup. The default
setting of JP4 is 3.3V.
Table 2.6: LVDS Connector Pin Assignment
Pin Signal Name
1 LVDS_CLKBP
2 GND
3 LVDS_YAP0
4 LVDS_YAP1
5 LVDS_YAP2
6 LVDS_CLKAP
7 +3.3 or +5V
8 GND
9 LVDS_YAP3
10 LVDS_YBP0
11 LVDS_YBP1
12 LVDS_YBP2
13 LVDS_YBP3
ARK-7480 User Manual
Figure 2.6: LVDS Connector
14
Pin Signal name
14 LVDS_CLKBM
15 LVDS_YAM0
16 LVDS_YAM1
17 LVDS_YAM2
18 LVDS_CLKAM
19 GND
20 +3.3 or +5V
21 LVDS_YAM3
22 LVDS_YBM0
23 LVDS_YBM1
24 LVDS_YBM2
25 LVDS_YBM3
26 GND