Post Assembly - Volkswagen Taro 1989 Workshop Manual

(c) Apply a light coat of engine oil to the threads and under the
connecting rod nuis
(d) Fit and aiiernateiy tighten the connecting
rod
nuts and in
several stages.
Torque 49 Nm
(e) Check that the crankshat turns smoothly
(1) Check the connecting rod thrust clearance
(See page 55)
7. F R rear oil seal retainer
Torque 12 Nm
B.
F i t timing chain case
Fn
a new gasket and the timing chaln case wth the nine bolts
and one nut (2)
Numbers lndlcate bolt length (mm) (1)
Torque
18 Nm
9.
F R water by-pass pipe
Flt a new gasket and the water by-pass pipe
POST ASSEMBLY
1.
Fit oil pump and engine oil pan
(See page 126)
2.
Fi timing chain and camshafi
(See pages 48 to 50)
3. Fit cylinder head
(See pages
35.36)
4.
FH oil finer bracket and oil fine1
Torque 18 Nm
5.
F i t alternator and bracket
6.
Remove engine from engine stand
7. Fi rear end plate