Disassembly Of Cylinder Block; Removal Water By-Pass Pipe; Preparation For Disassembly - Volkswagen Taro 1989 Workshop Manual

-
PREPARATION FOR DISASSEMBLY
Remove clutch cover and disc
Remove flywheel
Remove rear end plate
F i t engine to engine m n d for disassembly
Remove alternator and bracket
Remow oil filter bracket and oil finer
Remove cylinder head assembly
(See page 24)
Remove timing chain and camshail
(See pages 40 to 42)
Remove engine oil pan and oil pump
(See pages 123.124)
DISASSEMBLY OF CYLINDER BLOCK
(See page
52)
l . Remove water by-pass pipe
Remove the two nuts and holding bolt, and remove the water by-
pass pipe with the gasket
Remove the rune bolts and one nut and remove the t m n g chaln
case and gasket
Remove the flve bolts rear 011 seal retamer dust seal and gasket