Disassembly Of Oil Pump - Volkswagen Taro 1989 Workshop Manual

4. Remove oil pan
(a) Remove the eighteen bolts
[b) lnsen the blade of SST
between
the cylinder block and
0 1 1 pan,
cm
off applied sealer and then remove the
011
pan
SST 09032-001 00
NOTE
.
Do not use
SST
for the timing chain cover side. If necessary,
use a screwdriver.
.
When removing the oil pan,
be
careful not to damage the
011
pan flange
5.
Remove oil strainer
Remove the four bolts, O-nng and strainer
6. Remove oil pump
Remove the bolt and pull out the oil pump
DISASSEMBLY
OF
OIL PUMP
(See page 123)
1.
Check oil pump operation
(a) Using a screwdriver, Immerse the oil strainer
In
oil and turn
the 011 pump shan clockwise Oil should come out of the all
outlet hole
[b) Close the oil outlet hole with your thumb and turn the oil
pump shan as before. The oil pump shan should be difficult
to turn
2.
Remove relief valve
Remove the rehet valve plug (3), spring (2) and valve (1)
3. Remove oil pump cover
Remove the three bolts and oil pump cover
4.
Remove drive and driven rotors