Removal Of Timing Chain And Camshaft - Volkswagen Taro 1989 Workshop Manual

PREPARATION FOR REMOVAL
1. Remove drive ben
2.
Remove tan and water pump pulley
(See page 115)
3.
Remove fuel Pump
4.
Remove distributor
5. Remove rocker shan assembly and push rods (See ateps
2
to
4
o n page 24)
REMOVAL OF TIMING CHAIN AND CAMSHAFT
(See page 38)
1. Remove valve liner8
Remove the eight valve Mers with a piece of wire or magnetic
finger
CAUTION
Always keep the valve lfter upright, and in
correcf order.
2.
Remove crankshaft pulley
(a1
USmg SST, remove the pulley bolt
SST 09213-70010 and 0933000021
(b) Using SST, remove the crankshati pulley
SST 09213-31021