Systems Insight Display Leds - HP StoreEasy 1000 Administrator's Manual

Figure 17 Drive LEDs
Item LED
1 Locate
2 Activity ring
3 Do not remove
4 Drive status

Systems Insight Display LEDs

The HP Systems Insight Display LEDs represent the system board layout. The display enables
diagnosis with the access panel installed.
Status Definition
Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an
update.
Rotating green Drive activity
Off No drive activity
Solid white Do not remove the drive. Removing the drive causes one or
more of the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration,
stripe size migration, capacity expansion, or logical drive
extension, or is erasing.
Flashing amber/green The drive is a member of one or more logical drives and
predicts the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
Hardware components 17