HP StoreEasy 1000 Administrator's Manual page 89

Table 5 Storage Management Provider errors (continued)
Error code Error message
0x2500505C The operation was successful, but it has resulted in
the storage pools being renamed.
0x2000505D The operation was successful, but it has resulted in
the storage pools being renamed.
0x2500505E Failed to get all logical drives from cache.
0x2500505F Failed to get the controller for the logical drive from
cache.
0x25005060 The disk(s) cannot be added to this pool because
it contains at least one LUN requiring RAID level
migration.
0x21005061 Failed to remove partition data from the logical
drive. You must manually clear the disk or delete
the partition. Otherwise, subsequent volume
creation requests might fail.
0x20005062 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6, RAID 50, RAID 60, RAID 10
(ADM), RAID 50 (2), RAID 50 (3), RAID 50 (4),
RAID 50 (5), RAID 1 (ADM), RAID 60 (2), RAID
60 (3), RAID 60 (4), RAID 60 (5).
0x20005063 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6.
0x23005064 The length of the virtual disk friendly name exceeds
the maximum supported length.
0x24005065 Failed to get the pool from the logical drive.
0x25005068 The virtual disk could not complete the operation
because its health or operational status does not
permit it.
0x24005069 Enclosure not found in cache.
0x2500506A Failed to update enclosure in cache.
0x2400506B Failed to get the enclosure for the physical disk.
0x2400506C Failed to get WMI class names to subscribe.
0x2100506D SMP assembly file not found.
0x2700506E The registry key
HKLM\HARDWARE\Description\System\BIOS
was not found.
0x2700506F The registry key
HKLM\HARDWARE\Description\System\BIOS\
SystemProductName
was not found.
Recommended action
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please re-install HP Storage Management Provider.
Please retry the operation.
Please restart HP Storage Management Service.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please restart HP Storage Management Service.
Please update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Please restart HP Storage Management Service.
Please restart HP Storage Management Service.
Please re-install HP Storage Management Provider.
The system is in an invalid state. Please contact HP Support.
The system is in an invalid state. Please contact HP Support.
Error codes 89