Make Electrical Connection; Complete Installation; Range Hood Use - Maytag UXT2030AY Installation Instructions And Use & Care Manual

30" (76.2 cm) and 36" (91.4 cm) range hoods
Table of Contents

Advertisement

Available languages

Available languages

Make Electrical Connection

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
C
A
B
A. White wires
B. Black wires
C. UL listed wire connector
D. Green (or bare) ground wire
2. Use UL listed wire connectors and connect white wires (A)
together.
3. Use UL listed wire connectors and connect black wires (B)
together.
WARNING
Electrically ground the blower.
Use copper wire.
Connect ground wire to green ground screw in
terminal box.
Failure to do so can result in death, fire, or
electrical shock.
4. Connect green (or bare) ground wire from power supply to
green ground screw in terminal box and securely tighten.
5. Install terminal box cover.
6. Reconnect power.
12
G
E
D
F
E. Home power supply cable or
power cord accessory kit
F. UL listed or CSA approved
½" strain relief
G. Green ground screw
Fire Hazard

Complete Installation

1. For some models, Install the 75W (max.) Incandescent light
bulb. See "Replacing the Incandescent light bulb" section.
2. Replace grease filter if removed. See the "Range Hood Care"
section.
3. Check the operation of the range hood fan and light. See
"Range Hood Use" section.
If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors
and odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the
kitchen.
Depending on your model, the hood controls are located on the
top or front panel of the range hood.
UXT20, UXT30, UXT40 and UXT42 Series Models
A
A. Incandescent light housing and cover
B. Grease filter retainer
C. Grease filter
UXT52 Series Models
B
A. Halogen lights
B. Grease filter retainer
C. Grease filter
B
C
A
C

Advertisement

Table of Contents
loading

Table of Contents