Connecting The Ad-8121 Printer / Mode 3; Command Mode - A&D HC-30Ki Instruction Manual

13-5. Connecting the AD-8121 Printer / MODE 3

When using MODE 3 of the AD-8121 printer, printouts are obtained using the
PRINT key (f-06-01 = 0), or auto-print mode A/B (f-06-01 =2 or 3).
The total data (accumulated by the
number of additions to M+ memory.
The AD-8121 / MODE 3 does not have statistical functions.
AD-8121 Printout Sample
MODE 1
QT
WT +3.155 kg
UW +2.542305
*
QT
WT +3.233 kg
UW +2.542305
*
*
AQ

13-6. Command Mode

In the command mode, the scale is controlled by commands that come from an
external device, computer etc.
Do not set f-06-01="1" (stream mode) to use with the command mode. if you don't
want to use command mode together with key mode or auto-print mode, set f-06-
01="4" (command mode only).
Use an optional cable listed below to connect with a computer.
AX-KO577A-200
AX-KO1786-200
(These cables have a DIN 7pin connector, but it can connect with OP-03.)
AX-KO577A-200
D-Sub 25 pin
male connector
1
2
3
4
5
6
7
(Other pins: N.C.)
+1241 PC
g
+1272 PC
g
+2513 PC
RS-232C cable, for D-sub 25 pin, length 2m
RS-232C cable, for D-sub 9 pin, length 2m
DIN 7 pin
connector
1
2
3
4
5
6
7
M+ key) will be printed along with the
ID. Number
pcs (Count)
Weight
Unit Weight
No. of Accum.
TOTAL
D-Sub 9 pin
female connector
1
2
3
4
5
6
7
8
9
46
MODE 3
ID 000123
QT +2168 PC
ST +3.104 kg
UW +1.431734
ID 000123
QT +1989 PC
ST +2.848 kg
UW +1.431734
N 2
TOTAL
+4157 PC
AX-KO1786-200
DIN 7 pin
connector
1
2
3
4
5
6
7
8
g
g