Connection To Peripheral Equipment; Connection To The Ad-8121B Printer - A&D FZ-300CT Instruction Manual

14. CONNECTION TO PERIPHERAL EQUIPMENT

14-1 Connection to the AD-8121B Printer

Set the following parameters to use the AD-8121B printer.
To print A&D standard format weight data, using the FZ-CT/GD,
FX-CT/GD PRINT key or FZ-CT/GD, FX-CT/GD auto print mode. (The
time and date can be added.)
To print A&D standard format weight data, using the AD-8121B DATA
key or AD-8121B built-in timer. (The time and date can be added.)
To print, using the AD-8121B chart printing function.
To print the FZ-CT/GD, FX-CT/GD statistical data.
To print GLP output.
Class Item and Parameter
prt
dout
Data output mode
pU5e
Data output
Data output pause
bp5
Baud rate
btpr
5if
Data bit, parity bit
Serial
Crlf
interface
Terminator
type
Data format
*1 Set appropriate parameters for "ap-p (Auto print polarity)" and "ap-b (Auto print difference) " when
auto print mode A or B (prt 1 or 2) is selected.
Set the AD-8121B DIP switch No.3 to ON when unstable data is printed with "prt 4".
*2 Set 1 when multiple lines are printed in the FZ-CT/GD, FX-CT/GD statistical calculation mode.
Notes
Refer to "10-2 GLP Report" for print samples.
Settings of AD-8121B DIP switches
MODE AD-8121B DIP switch
MODE 1
MODE 2
MODE 3
DIP switch No.3 : Handling unstable data
ON Print
OFF Not printed
Set the DIP switch No.4 to OFF.
Example of use
MODE
Print at receiving data.
4 3 2 1
Standard mode, statistical calculation mode
Print by the AD-8121B DATA key operation or AD-8121B
MODE
4 3 2 1
built-in timer.
Standard mode, interval mode, chart mode
MODE
Print at receiving data.
4 3 2 1
Dump print mode
Factory AD-8121B
settings MODE 1
0 0,1,2,4,5 *1
0 0
2 2
0 0
0 0
0 0
Description
MODE
4 3 2 1
MODE
4 3 2 1
56
AD-8121B mode setting
MODE 1
MODE 2
MODE 3
MODE 3
AD-8121B AD-8121B
MODE 2 MODE 3
3 0,1,2,4,5 *1
0 0,1 *2
2 2
0 0
0 0
0 1