Unit Weight By Id Number - A&D HC-30Ki Instruction Manual

3-5. Unit Weight By ID Number

1. If there are no unit weights stored in memory, see "5-1. Store unit weight by ID
Numbers".
The three UNIT WEIGHT BY LED's should be blinking at this point, if not, press
the RESET key to clear any unit weight.
2. Press the ID key.
'id-00' will be displayed with 00
blinking.
3. Use the 0
display the ID number.
If you hit the wrong key, press the
C key to clear and start again.
(Example of ID number '12' )
4. Press the ENTER key.
The count display will show '0' and
the scale will recall '12g' previously
entered as the unit weight of ID 12.
If there is no unit weight entered for the ID
number you tried to recall, "no id" will be
displayed, and you will be returned to step 3.
5. You may now begin counting operations
for pieces of the same weight.
9 10-key pad to
"id-00" is a special memory area. It always holds the last unit
weight entered.
When you register a unit weight, it is automatically placed in the
ID "id-00".
If you clear the unit weight by pressing the RESET key, it can
be recalled by recalling the ID "id-00".
888. 8 . 8 . 8 10
ID.
WEIGHT
8880. 0
888. 8 . 8 . 8 10
WEIGHT
8880. 0
888. 8 . 8 . 8
ENTER
WEIGHT
8880. 0
00
888. 8 . 8 . 8 10
beep, beep, ...
WEIGHT
8880. 0
00
17
COUNT
UNIT WEIGHT
008 aid-00
8
COUNT
UNIT WEIGHT
008 aid-12
8
COUNT
10
UNIT WEIGHT
008 12. 0 0000
8
COUNT
UNIT WEIGHT
008 ano0id0
8