Store Unit Weight; Store Unit Weight By Id Numbers - A&D HC-30Ki Instruction Manual

5-1. Store Unit Weight by ID Numbers

The scale can store up to 99 unit weights by 2 digit ID numbers, from 01 to 99. To
recall, see "3-5. Unit Weight By ID. Number".
The scale is initially set to store ID numbers with a unit weight only. However, it can
be set to store a TARE weight and comparator limits by setting F-Function f-01-05.
1. First register a unit weight by any
method – using a sample or via the
10-key pad – and have it displayed.
2. Press the STORE UNIT WEIGHT
key. "id-00" will appear with
blinking.
3. Use the 0
display the new ID number.
(Example of ID number "12")
If you hit the wrong key, press the C key to clear and start again.
4. Press the ENTER key.
The ID number is stored and the
display returns to normal.
If the same ID number was previously
stored, the scale beeps twice and the ID
number display stops blinking.
You must then select one of two options:
either (a) Overwrite the old ID unit weight,
or (b) Select a different ID number:
ENTER

5. STORE UNIT WEIGHT

00
9 10-key pad to
Press the ENTER key
to overwrite the old ID
number.
888. 8 . 8 . 8
WEIGHT
8881. 1
00
WEIGHT
8881. 1
STORE
UNIT
WEIGHT
WEIGHT
8881. 1
WEIGHT
8881. 1
ENTER
00
888. 8 . 8 . 8
beep, beep
WEIGHT
8881. 1
Press the C key to
C
clear and go to step 3.
OR
20
COUNT
10
UNIT WEIGHT
108 111. 0 000
8
UNIT WEIGHT
108 1id-00
8
UNIT WEIGHT
108 1id-12
8
UNIT WEIGHT
108 111. 0 000
8
COUNT
10
UNIT WEIGHT
108 1id-12
8