A&D HC-30Ki Instruction Manual page 49

Command List
Command
@ Start / stop continuous data transmission.
Same as RESET key.
A
D Set a known tare weight.
Store the unit weight and other values in use to
E
ID memory.
F Recall a unit weight from ID memory.
G Set a known unit weight.
J Same as the TOTAL key.
K Same as the M+ key.
Q Send data immediately.
S Send stable data after accepting command.
T Same as the TARE key.
X Request a list of the F-Function parameters.
Y Request a list of the ID memory contents.
Z Same as the ZERO key.
ON Start the scale from power on sequence
?ID Send the ID number in use.
?QT Send the pcs (count) data.
?WT Send the weight data.
?UW Send the unit weight in use.
Send the total (accumulated) M+ memory count
?AQ
d t
?AN Send the number of additions to M+ memory.
?TR Send the tare weight in use.
?MR Send the specified ID memory contents.
Store the unit weight and tare weight into the
MR
specified ID memory.
Store the comparator limits into the specified ID
ML
memory.
CM Clear the specified ID memory contents
?FC Send the specified F-Function setting.
FC Store the specified F-Function setting value.
Acknowledgment and Error Codes
When the scale receives an external command, it reacts as follows:
If the command requests a data reply, the scale will send the data.
For other commands, the scale will send an acknowledgment <ACK><C
<ACK> (see F-Function "f-09-02") upon acceptance of the command.
Definition
47
Notes
Key command
"D,1.23C L " sets the tare
R F
weight as "1.23kg".
Refer to the data format.
Refer f-01-05
"F12C L " recalls from ID12.
R F
"G,0.123C L " sets the unit
R F
weight as "0.123g" (or "0.123 lb").
Key command
Key command
Data depends on f-06-02
Key command
The last data terminates with
<EOT> (04H)
Key command
Refer to the data format for the
reply.
Refer to the data format for the
reply.
"CM,1.2C L " clears content of
R F
id12.
Refer to the data format for the
reply.
><L > or
R F