To Start Counting - A&D HC-30Ki Instruction Manual

3-2. To Start Counting

1. Press the ON/OFF key to turn the
scale ON. Or press the RESET
key to initialize
operations.
2. The three LED's on the
WEIGHT BY keys will blink. This is
to prompt you to select a method for
entering a unit weight for operation.
3. elect one of the ways to enter or recall the unit weight (the weight of one item of
S
what you are counting), and see the section noted for more instructions.
UNIT
WEIGHT BY
You can return to this point at any time during
operation by pressing the RESET key.
(This doesn't clear the entered tare weight,
M+ memory, AWA settings and comparator limits.)
any previous
KEY-
ID. SAMPLE
BOARD
By using the l0-key pad: Section"3-4"
By stored lD number: Section"3-5"
888. 8 . 8 . 8
TOTAL
M+
SAMPLE
TOO LIGHT
UNIT
8880. 0
STABLE
TARE
ENTERED
ZERO
By using a sample: Section "3-3"
10 sample size
5, 25, 50 or 100 sample size
Desired sample size
Desired sample size not using
the
SAMPLE
11
COUNT
80
HI OK LO
WEIGHT UNIT WEIGHT
008 0. 0 0000
8
ACAI
key
RESET