A&D HC-30Ki Instruction Manual page 28

5. Press the ENTER
the setting and move to next F-
Function, f-05-02.
6. Continue to enter f-05 comparator
settings – refer to "9-2. F-Functions" for a
listing. If there are no changes to a F-
Function, press the
move to the next.
7. When finished: press the ON/OFF key to exit.
Then, press it to turn the display back ON.
Comparator functions and limits will now operate
as set.
Viewing Comparator Limits
The comparator limits you are using will be shown by pressing the
Set f-09-01="0" to use this mode.
1. Press the
limit will be shown.
2. Press the
lower limit will be shown.
3. Press the
return to normal.
Changing Comparator Limits Instead of Setting the F-Function
Set f-09-01="0" to use this mode.
1. To change the upper limit, use the 0
9 10-key pad to display a new
limit in step 1 above, and press the
ENTER key. Then the new limit is
stored and the lower limit will be
shown.
2. To change the lower limit, use the 0
9 10-key pad to display a new
limit, and press the ENTER key.
Then the display will return to
normal with the new limit.
Pressing the
step, the input data is not stored.
These limits are held in memory even
if power to the scale is switched off.
key to save
ENTER key to
key, then the upper
key again, then the
key. The display will
key to go to next
8f-05-02
ENTER
88Clear8
00
ENTER
888. 8 . -
WEIGHT
88-0. 0
888. 8 . -
WEIGHT
ENTER
88-0. 0
888. 8 . -
ENTER
WEIGHT
88-0. 0
26
aidal00
8
To ENTER
or
MOVE to next
key.
COUNT
102
UNIT WEIGHT
008 11Hi00
8
Upper limit
COUNT
102
UNIT WEIGHT
008 11Hi00
8
COUNT
198
UNIT WEIGHT
008 11lo00
8