Table of Contents
Advertisement
Related references
Media Setup Menu Settings
Related tasks
Cutting Media
Checking for Clogged Print Head Nozzles
Cleaning the Print Head
Media Does Not Feed Correctly
If media does not feed straight or roll up on the auto take-up reel correctly, try these solutions:
• Make sure your media is at least 36 inches (91.4 cm) wide for best results.
• If your media is attached to the auto take-up reel with the printable side out, try attaching with the
printable side in instead.
• If your media is thick, set the RIP software settings to use 3 passes or higher for best results.
• Perform the parallel adjustment procedures to correct the feed misalignment, especially after moving
the printer.
Parent topic:
Related references
Media Setup Menu Settings
Media Specifications
Related tasks
Loading Media
Adjusting the Media Feeding Unit
Related topics
Using the Auto Take-up Reel
Solving Media Skew Problems
If media skew is detected by your product, perform the parallel adjustment procedure to ensure that the
media is fed straight into the product and onto the auto take-up reel.
Note: Also perform the parallel adjustment procedure after you have moved the printer.
Solving Printing Problems
189
Advertisement
Table of Contents
