Note: If the edges are not aligned, reverse these steps to remove the media, and repeat these steps
to reload it on the auto take-up reel.
7. Move the Auto switch to the
Parent topic:
Take Up with the Printable-Side-Out
After attaching the roll core on the auto take-up reel, follow these steps to take up media with the
printable side out.
1. Guide your loaded media through the front of the media guide bar and on top of the roll core, then
attach the media to the roll core with tape as shown here. Begin with the center piece of tape, pulling
position.
Using the Auto Take-up Reel
67