Aligning The Print Head - Epson SureColor F9200 User Manual

Parent topic:
Related references
Media Setup Menu Settings

Aligning the Print Head

If your printouts are grainy or out of focus, you need to align the print head. The thickness of your print
media determines the alignment options you select. You can store separate alignment values for each
type of media you use for quick selection.
Before aligning the print head, make sure you have correctly loaded the media you plan to print on.
1. Press the Menu button.
2. Select Media Setup and press the OK button.
3. Press the up or down arrow button to select Customize Settings and press the OK button.
4. Press the up or down arrow button to select the number of the media settings you selected for the
currently loaded media. Then press the OK button.
5. Press the up or down arrow button to select Head Alignment and press the OK button.
6. Press the up or down arrow button to select one of these adjustment methods and press the OK
button:
• If you are printing bidirectionally on your media, select the Manual(Bi-D) setting. If the print quality
has not improved, repeat the steps here and select the Manual(Dual Head) setting. If you need
further alignment, select the Manual(Uni-D) setting.
• If you are printing unidirectionally on your media, select the Manual(Dual Head) setting. If the
print quality has not improved, repeat the steps here and select the Manual(Uni-D) setting.
Your product prints an alignment test pattern and automatically feeds the media to viewing position.
Note: If you want to cut the media to better view the pattern, press the up arrow button to move the
media past the cutter groove. Be careful not to rewind curled media past the front cover.
Media Handling
46