Epson SureColor F9200 User Manual page 82

Options
Head Alignment
Roll Type
Tension Measurement
Feeding Tension
Take-up Tension
Prevent Sticking
Restore Settings
Print
Description
Enter a media Input thickness value from 4 to 40 mil (0.1
to 1.0 mm).
Select one of the following when print results are grainy or
out of focus:
Manual(Bi-D): when printing in both directions.
Manual(Uni-D): when printing in one direction.
Manual(Dual Head): if the previous setting does not
improve the results.
Select Printable Side Out or Printable Side In based on
how the media is rolled.
Selects how often tension is measured and automatically
adjusted:
Periodically: recommended for most media.
Every page: provides more precise tensioning (but slower
printing).
Select Auto for most media.
When you select Manual, you can set a value from 0 to 40.
If media creases, set the value higher than Lv32. If banding
appears, set the value lower than Lv32.
When Media Size Check is off, select Manual and set the
value based on the media width.
Select Auto for most media.
When you select Manual, you can set a value from 1 to 9.
If media wrinkles, banding appears, or ink sticks to the
back of the take-up roll, set the value lower than Lv7. If
thick media cannot be wound correctly, set the value higher
than Lv7.
Select On only if the media sticks to the platen when the
printer is turned on or when printing starts.
Returns all RIP settings to their default values.
Prints the contents of media setting banks 1 to 30.
82