Epson SureColor F9200 User Manual page 89

Symptom
A prepare and replacement message appears on
the LCD screen.
A message on the product LCD screen tells you to Apply carriage rod grease to the carriage rods.
apply carriage rod grease.
You want to check the print quality for clogged
nozzles.
A nozzle check pattern indicates clogged nozzles.
Print quality has declined.
Printed media is faint, or contains horizontal
stripes or uneven colors.
Even after cleaning the print head several times,
print quality has declined.
Printed media is smudged.
Ink, paper particles, or lint from the media
accumulate on the platen, pressure rollers, or
media holding plates.
Ink adheres to the heat shield.
Water or dirt adheres to the front cover.
Ink adheres to the absorber on the back of the
wiper cleaner.
Printed media is faint, smudged, or incomplete and Replace the wiper.
the wiper is torn or deteriorated.
The media holding plates are deformed or
damaged.
Vertical creases appear in printed media even
after adjusting the tension settings.
Parent topic: Maintenance
Maintenance or consumable operation
Replace the waste ink bottle.
Run a nozzle check to print a check pattern.
Clean the print head.
Perform the following as necessary:
• Clean around the print heads.
• Clean the wipers and their attachment points.
• Clean the anti-drying caps.
Clean the platen, pressure rollers, and media
holding plates as necessary.
Clean the heat shield.
Clean the front cover.
Replace the wiper cleaner.
Replace the media holding plates.
Use the spacer.
89