Assembling And Dismantling The Two-Piece Shaft (325P5) - Husqvarna 323P4 Operator's Manual
X-series
Hide thumbs
Also See for 323P4:
- Operator's manual (32 pages) ,
- Operator's manual (28 pages) ,
- Operator's manual (32 pages)
Table of Contents
Advertisement
Assembling and dismantling the
two-piece shaft
(325P5)
Assembly:
•
Make sure the knob is loose.
•
Align the cut-out in the upper shaft with the coupling's lock
plate on the lower shaft. The parts then lock together.
•
Tighten the knob.
Dismantling:
Undo the knob (at least three turns).
•
Push the knob towards the coupling.
•
Carefully twist the upper shaft to unlock it.
•
Hold both parts of the shaft and pull the upper shaft out of
the coupling.
ASSEMBLY
– 17
English
Hide quick links:
Advertisement
Table of Contents
