Assembling And Dismantling The Two-Part Shaft (325P5) - Husqvarna 323P4 Operator's Manual

Assembling and dismantling the
two-part shaft (325P5)
Assembling:
• Make sure the handle is
loose.
• Guide the cut-out on the
lower section of the shaft
into the coupling's
locking plate on the
upper section of the
shaft. The sections are
then locked together.
• Tighten the handle.
Dismantling
• Undo the handle (at least
three turns).
• Press the handle towards
the coupling.
• Carefully twist the lower
section out of the lock.
• Hold both parts of the
shaft and pull out the
lower section from the
coupling.
18
– English
ASSEMBLY