Ec-Declaration Of Conformity - Husqvarna 323P4 Operator's Manual

Bar and chain combinations
The following combinations are CE approved.
Bar
Length, inches Pitch, inch
10 3/8
12 3/8
10 3/8
12 3/8
D
_
D
PITCH =
2

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pruning saws
Husqvarna 323P4 and 325P5 dating from 2002 serial numbers and onwards (the year is clearly stated on the rating plate, followed
by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN ISO 11806.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type approval for
Husqvarna AB. The certificates have the numbers: 404/01/841 – 323P4, 404/02/863 – 325P5.
The supplied pruning saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
TECHNICAL DATA
Chain
Max. no of teeth
on tip sprocket
Husqvarna S 36/
7T
Oregon 91 VG
Husqvarna S 36/
7T
Oregon 91 VG
7T Oregon 90SG
7T Oregon 90SG
L
– 25
English