Power Save Function; Low Battery Indication - Icom IC-F25SR Instruction Manual

' ' Power save function

The power save function reduces the current drain to conserve bat-
tery power.
• The power save function is automatically turned ON when no opera-
tion is performed or no signal is received for 5 sec.

' ' Low battery indication

The LED indicator indicates 4 levels of the "Low battery" condition
as follows.
If the "Low battery" warning occurs during operation, please charge
or replace the battery.
[Blink patterns]
• Low BATT1: You should charge the battery. (blinks slowly)
• Low BATT2: You must charge the battery. (blinks fast)
• TX low BATT1: Low BATT1 was detected during TX mode.
• TX low BATT2: Low BATT2 was detected during TX mode.
In an extreme low temperature surroundings (around –20°C), the
capacity of the battery may exhaust quickly (especially Alkaline
batteries). In such a case, we recommend to charge the battery
or replace the batteries, when the "Low Battery" indication occurs
during operation.
G G
R
R R
OTHER FUNCTIONS
G
G
R
R R
5
5
G
G
22