Furuno FAR-2107 Operator's Manual page 95

5. Select "2".
6. Select function desired then push the scrollwheel or left button.
7. Push the right button twice to close the menu.
Item
[ECHO]
PICTURE
IR
ES
EAV
NOISE REJ
ANT SELECT
PULSE LENGTH
A/C SEA SELECT
AUTO RAIN SELECT
TUNE SELECT
ANT HEIGHT
SEA CONDITION
ND
2 ECHO REJ
PM
SART
WIPER
[STD KEY]
ALARM ACK
STBY TX
HL OFF
EBL OFFSET
OFF CENTER
CU TM RESET
PI LINE
VECTOR TIME
VECTOR MODE
TARGET LIST
TRAIL
BRILL
MARK
MENU
RANGE UP
RANGE DOWN
ACQ
TARGET DATA
TARGET CANCEL
Description of function key programs
Selects picture setup function.
Selects interference rejection level.
Selects echo stretch function.
Selects echo averaging function.
Turns noise rejector on/off.
Selects antenna.
Selects pulselength.
Selects A/C SEA adjustment method.
Selects AUTO RAIN level.
Selects tuning adjustment method.
Sets antenna height.
Sets sea condition.
nd
Turns 2 trace echo rejector on/off.
Turns performance monitor on/off.
Turns SART setup conditions on/off.
Turns wiper (reduce weak and unwanted signals) on/off.
Acknowledges alert. (Silences audible alert signal.)
Toggles between stand-by and transmit.
Turns heading line on/off.
Offsets EBL.
Off centers the display.
Returns own ship mark to point 75% of range in use.
Turns PI line on/off.
Sets vector time.
Sets vector mode.
Displays target list.
Sets trail parameters.
Sets brilliance.
Selects mark to inscribe.
Opens the MAIN menu.
Raises the range scale.
Lowers the range scale.
Acquires target; activates sleeping AIS target.
Shows target data for selected tracked target or AIS target.
Cancels tracking of tracked target; sleeps AIS target.
1. RADAR OPERATION
Description
1-71