Furuno FAR-2107 Operator's Manual page 283

ALR- Set alarm state
$--ALR,hhmmss.ss,xxx,A,A,c--c*hh<CR><LF>
| | | |
| | | |
| | | |
| | | +-------------------- 4
| | +---------------------- 3
| +------------------------- 2
+--------------------------------- 1
1. Time of alarm condition change, UTC
2. Local alarm number(identifier)
3. Alarm condition(A=threshold exceeded, V=not exceeded)
4. Alarm's acknowledge state, A=acknowledged V=unacknowledged
5. Alarm's description text
6. Checksum
ARC - Alert command refused
$--ARC, hhmmss.ss, aaa, x.x, x.x, c*hh<CR><LF>
| | |
| | |
| | |
| | |
| | +-------------------------- 3
| +-------------------------------- 2
+----------------------------------------- 1
1. Release time of the Alert Command Refused
2. Used for proprietary alerts, defined by the manufacturer, FEC / null
3. The alert identifier, 1 to 999 or 10001 to 10999
4. The alert instance, null
5. Refused Alert Command, A / Q / O
A: acknowledge
Q: request / repeat information
O: responsibility transfer
S: silence (No use)
6. Checksum
BBM- UAIS Broadcast binary message
!--BBM,x,x,x,x,xx,s--s,x*hh<CR><LF>
| | | | | |
| | | | | |
| | | | | | +------ 7
| | | | | +--------- 6
| | | | +------------- 5
| | | +---------------- 4
| | +------------------ 3
| +-------------------- 2
+---------------------- 1
1. Total number of sentences needed to transfer the message, 1 to 9
2. Message sentence number, 1 to 9
3. Sequential Message identifier, 0 to 9
4. AIS channel for broadcast of the radio message
5. VDL message number(8,14,19 or 21), see ITU-R M.1371
6. Binary data
7. Number of fill-bits, 0 to 5
8. Checksum
| |
| +------------- 6
+----------------- 5
| | |
| | +-------------- 6
| +----------------- 5
+--------------------- 4
| |
| +--- 8
APPENDIX
AP-25