Performing A Trial Maneuver - Furuno FAR-2107 Operator's Manual

Static trial maneuver
The static trial maneuver shows the relationship between your ship and tracked
targets at the completetion of the trial maneuver. Enter expected course and
speed and delay time until start of a maneuver and the expected position of your
ship and tracked targets at the end of the trial maneuver are shown on the
display.
By shortening and extending the trial time you can find the safe time to make a
maneuver. Thus, the static trial maneuver will be convenient when you wish to
know the maneuver result immediately.
3.16.2

Performing a trial maneuver

To perform a trial maneuver, do the following:
1. Left-click the MENU box to open the menu.
2. Select 4 [TT•AIS] to open the TT•AIS menu.
Course and speed changes
completed; position where
course and speed are changed
Position of target A
at end of trial
maneuver
[TT•AIS]
1 BACK
2 AZ STAB
STAB HDG/STAB NORTH
4 AZ POLYGON
OFF/STAB GND/
STAB HDG/STAB NORTH
4 [TRIAL MANEUVER]
5 [TT•AIS SYMBOL]
6 [CPA AUTO ACTIVATE]
7 [AIS DISP FILTER]
8 [AIS LOST FILTER
9 [TT LOST FILTER]
0 [ASSOCIATION]
Position of target B at end
of trial maneuver
Delay time
Current position
of your ship
A
T
TT•AIS menu
3. TARGET TRACKING (TT)
B
3-27