Tt Symbol Color - Furuno FAR-2107 Operator's Manual

3. TARGET TRACKING (TT)
3.8.4

TT symbol color

You may select the color for the TT symbol as follows:
1. Left-click the MENU box to open the menu.
2. Select 4 [TT•AIS] to open the TT•AIS menu.
3. Select 5 [TT•AIS SYMBOL].
4. Roll the scrollwheel to select the desired color and press the left button.
5. Press the right button 3 times to close the menu.
3-12
[TT•AIS]
1 BACK
2 AZ STAB
STAB HDG/STAB NORTH
3 AZ POLYGON
OFF/STAB GND/
STAB HDG/STAB NORTH
4 [TRIAL MANEUVER]
5 [TT•AIS SYMBOL]
6 [CPA AUTO ACTIVATE]
7 [AIS DISP FILTER]
8 [AIS LOST FILTER]
9 [TT LOST FILTER]
0 [ASSOCIATION]
TT•AIS menu
[TT•AIS SYMBOL]
1 BACK
2 TT•AIS SYMBOL COLOR
RED*/GRN/BLU/YEL*/
CYA/MAG/WHT
3 AIS ROT TAG LIMIT
0.000°/MIN
4 TT PAST POSN POINTS
5/10
5 AIS PAST POSN POINTS
5/10
6 AIS SCALED SYMBOL
OFF/ON
7 AIS BASE STATION
OFF/ON
8 AIS PHYSICAL ATON
OFF/ON
9 AIS VIRTUAL ATON
OFF/ON
* Not available on
IMO type