Erasing All Radar Map Marks And Lines - Furuno FAR-2107 Operator's Manual

5.5.2

Erasing all radar map marks and lines

You can erase all radar map marks and lines from the screen as below. Be
absolutely sure you want to erase all map marks and lines – erased marks and
lines cannot be restored.
1. Left-click the MENU box to open the menu.
2. Select 5 [PLOTTER] to open the PLOTTER menu.
3. Select 8 [DATA ERASE].
1 BACK
2 OWN TRACK*
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
3 TARGET TRACK*
RED/GRN/BLU/YEL/
CYA/MAG/WHT/
30%/50%/80%/ALL
4 MARK ALL ERASE
NO/YES
5 WPT ALL ERASE
NO/YES
6 NAV LINE ALL ERASE
NO/YES
7 OWN TRACK DELETE*
2POINTS/AREA
8 TARGET TRACK DELETE*
2POINTS/AREA
4. Select 4 MARK ALL ERASE.
5. Select YES to erase all marks.
6. Push the right button three times to close the menu.
[DATA ERASE]
1
2
3
3
DATA ERASE menu
5. VIDEO PLOTTER OPERATION
1
* Colors not shown on IMO type
* 2 Not available on IMO type
* 3 Not available on IMO or A type
5-7