Furuno FAR-2107 Operator's Manual page 110

1. RADAR OPERATION
DUAL RADAR ALERT (Non-IMO only)
EXT RADAR Warning
ERROR
EXT RADAR HDG Warning
SET
EXT RADAR STBY Caution
OTHER ALERT
ANCHOR WATCH Warning
ARRIVAL Warning
CHECK INT-SW Warning
DEPTH Warning
WATCH Warning
XTE Warning
HEADING SET Warning
HBT TIMEOUT Caution
TT ALERT
(See section 3.15.)
1-86
External radar malfunction
Problem with heading data at
external radar.
External radar is in standby
Ship has drifted more than a
threshold value.
Own ship has arrived to a
waypoint.
Interswitch malfunction
Depth is lower or higher than
threshold value.
WATCH 0:00
(WATCH appears and time
count freezes at 0:00).
Own ship is off course more
than threshold value.
Heading signal has been
restored.
Periodic HBT sentence input
from Bridge Alert Management
System (BAMS) interrupted.
Restore external radar to normal condition
to erase indication.
Re-set external radar's heading data to
erase indication.
Set external radar in transmit to erase
indication.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box. Check interswitch.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box.
Press the [ALARM ACK] key or click the
WATCH box with the left button.
The WATCH box is displayed in normal
video and the timer is reset.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box.
Press the [ALARM ACK] key to erase the
message. Match the on-screen HDG
readout with the actual compass reading,
if necessary.
Acknowledge indication by pressing the
[ALARM ACK] key or left-clicking the Alert
box. Check if BAMS is working.