Table of Contents
Advertisement
3
The basics of operation
In this chapter you will learn about the basic optimail 30 functions and how to handle
the franking machine user interface.
3.1
Turning on / off
Push the power switch, the toggle switch on the back left side of the franking
machine, to turn the optimail 30 ON or OFF.
Caution! Wait for at least one minute before you turn the optimail 30 on
again.
The home menu (example)
Turning on
I
• Push
(= ON) on the power switch.
The display lights up and a self check starts.
The optimail 30 tests and activates all
machine components. This procedure takes
some time and is accompanied by signal
tones and display messages.
Finally the home menu appears.
The optimail 30 is ready and displays the
following franking options:
– The postage and, if applicable, the
endorsement imprint are the settings
saved under MEM 1.
– The advert and text message are ruled by
the current account.
– An account has been set when an access
card (MASTER or USER) has been
plugged or access control was disabled.
– Current date.
Turning off
O
• Push
(= OFF) on the power switch.
The optimail 30 switches off. The display light
goes out.
The basics of operation
11
Advertisement
Table of Contents
Need help?
Do you have a question about the optimail 30 and is the answer not in the manual?