Changing The Battery - FP optimail 30 Operator's Manual

14.4

Changing the battery

The optimail 30 monitors the charging state of the battery. An appropriate message
appears in the display when it is time to change the battery.
Caution! Only use the batteries provided by Francotyp-Postalia
90.4701.8004.00. Observe the instructions enclosed with the battery.
Power switch
Modem cable
• Remove the access card.
• Switch off the optimail 30.
• Unplug the power cable from the socket.
• Unplug the power cable.
• Remove the modem cable.
Push the spring on the connector and pull
the connector out of the modem socket.
Power cable
• Remove the catch tray:
Slightly lift the franking machine on the
right side and pull the catch tray away to
the right.
• Remove the sealer (if present): Slightly lift
the franking machine on the left side and
pull the sealer away to the left.
• Remove the scale platform (if present): Pull
off scale platform upwards.
Maintenance and care
91