Commissioning; General; Area Of Application - Proper Usage; Installation - EWM PICO 230 Operating Instructions Manual

Commissioning

General

6 Commissioning
6.1 General
Warning – Risk from electrical current!
Follow the safety instructions on the opening pages entitled "For your safety".
Connection and welding leads (e.g. electrode holder, welding torch, workpiece lead, interfaces)
may only be connected when the machine is switched off.
6.2 Area of application – proper usage
These welding machines are suitable only for MMA and TIG welding with Liftarc.
PICO 230; 260; 300
• MMA direct current welding for rutile, rutile/basic and rutile/cellulose electrode types.
PICO 230; 260 CEL; PICO 260; 300 CEL PWS
MMA direct current welding for rutile, rutile/basic, basic, rutile/cellulose and cellulose electrode types.
•
Any other use is regarded as "improper" and no liability is assumed for any damage arising therefrom.
We can only guarantee smooth and trouble-free operation of the machines when used in conjunction with
the welding torches and accessories from our range!
6.3

Installation

Ensure that the machine is set up in a stable position and is appropriately secured.
With modular systems (power source, transport vehicle, cooling module), observe the operating
instructions for the relevant machine.
Set up the machine so that there is sufficient room to adjust the operating elements.
24 Item No.: 099-002032-EWM01