Importing Ir Hex File Codes - AMX Novara 1000 Series Operation/Reference Manual

7.
Enter a function name in the Enter Function text field.
8.
Learn the code from the remote controller:
a.
Hold the remote approximately 3-inches away from the
HC to capture the first function. The
LED
b.
The [ ] briefly appears in the display to indicate the HC function is captured. Then, 01 appears and the
and
c.
Hold the HC device approximately 3-inches away from the
the HC device again to verify the
captured correctly, a pair of [ ] (brackets) will briefly flash in the display. The
in the display, and the
5. Otherwise, go to step 6.
d.
Press the
e.
Repeat steps C through E to capture all the HC functions on your list.
9.
Click on Capture then press the Send button on the front panel of the IRIS. The function will be added to the current
device library.
Refer to the IREdit instruction manual for information on to storing captured HC functions.

Importing IR HEX File Codes

Alternatively, IR Libraries can be created by importing IR HEX file codes.
AMX does not provide HEX codes, and therefore, cannot give any assurance that
data provided by others is accurate or functional. There are a number of web sites
that make IR HEX codes freely available. One such site is Remote Central, where
you can search for your specific device and look for downloads with "text files with
HEX codes".
1.
In the Edit Options window of the AMX Library Files dialog, click Import Hex File to access the Hex data import
and conversion options (FIG. 80).
FIG. 80 AMX Library Files dialog - Hex data import and conversion options
2.
Enter the name of the function that you want to import, in the Enter Function text field.
Novara ControlPads & KeyPads
goes off.
s light. The will not light if P4 mode is active.
VERIFY LED LED
IR
pushbutton's
SEND
pushbutton to send the captured HC function to the PC running the IREdit software program.
SEND
AMX Novara DCS1000 Device Configuration Software
capture window. Press and hold the first key on the
IR
will start blinking. Release the HC key as soon as the
SIGNAL LED
capture window. Press and hold the same key on
IR
function was captured correctly by the IRIS unit. If the HC function is
lights. If an Er message appears in the display, repeat steps 3 and
LED
READY
READY
goes off, 01 appears
VERIFY LED
49