Rs232 Out Connector; Ir Out Connector - AMX Novara 1000 Series Operation/Reference Manual

RS232 Out Connector

FIG. 9 illustrates connecting a 1000 Series ControlPad to RS232-controlled devices:
RS232 Device
FIG. 9 RS232 Out Connector
Novara ControlPads support one-way RS-232 control (RS-232 TX signals to the
third-party device, not RS-232 RX signals from the controlled device).

IR Out Connector

If using the CC-NIRC IR emitter with 2-pin phoenix connector (not included), be
aware that the IR Emitter polarities on Novara ControlPads are opposite to that of
other AMX equipment. This is not an issue if using the included 10-pin connector.
FIG. 10 illustrates connecting the IR transmitter heads to a 1000 Series ControlPad for IR-controlled devices:
IR Transmitter
FIG. 10 IR OUT Connector
The IR Transmitter must be placed directly in front of the controlled device's IR
window.
Novara ControlPads & KeyPads
Signal
GND
Signal
GND
Novara ControlPads
SHARED 12V
SHARED 12V
9