Re-Assembling The Keypad; Exploded View - 8-Button Us Version; Exploded View - 8-Button Uk/Eu Version - AMX Novara 1000 Series Operation/Reference Manual


Verify that the vertical orientation of the Button Label is correct relative to the Novara keypad.

Align the Key Cap with the target pushbutton, and gently push the Key Cap down over the pushbutton.

Once seated properly on the pushbutton, the Key Cap will snap into place.

Re-Assembling the Keypad

Follow the steps in reverse to re-assemble the keypad. Take care of the following:

Be certain that the circuit boards are oriented correctly (see FIG. 33)

Be certain that both 4-pin connectors (between the two boards) are seated
properly.

Exploded View - 8-Button US Version

FIG. 36 8- Button US

Exploded View - 8-Button UK/EU Version

FIG. 37 8- Button UK/EU
Novara ControlPads & KeyPads
Button Labelling
29