Delay Time; Adding Delay Time To A Script (Example) - AMX Novara 1000 Series Operation/Reference Manual

Delay Time

A delay time can be added in between events in a Script.

Delays can range from 0.5 seconds up to 24hours.

The delay is absolute and no other Event or Button press will be acknowledged until the time period has
elapsed.

Adding Delay Time to a Script (Example)

1.
Select a button, and add Flash feedback as Event 1 (FIG. 53).
FIG. 53 Button 1 selected, "Flash" Button Feedback selected and added to Script as "Event 1"
2.
Click Add Time Delay to invoke the Set Time Delay window (FIG. 54).
FIG. 54 Set Time Delay window
3.
Use the left/right arrow buttons to specify a time period.

Click the arrows on the Hours field to adjust hours up/down, in one-hour increments.

Click the arrows on the Minutes field to adjust minutes up/down, in one-minute increments.

Click the arrows on the Seconds field to adjust seconds up/down, in one-half second increments.
For this example set the Time Delay Between Events period for 5 seconds (FIG. 55).
FIG. 55 Set Time Delay window - 5-second delay
4.
Click Add to Script to add the Time Delay Between Events to the script, as Event 2.
5.
Set the Button Feedback action to On, and add it to the script as Event 3 (FIG. 56).
6.
Download the program (see the Downloading the Program to the ControlPad section on page 33).
Novara ControlPads & KeyPads
AMX Novara DCS1000 Device Configuration Software
37