Novara AxLink KeyPads
Wiring and Connections
ControlPads - Rear Panel Connectors
FIG. 21 shows the rear panel connectors of the Novara AxLink KeyPads, and indicates a typical installation:
NetLinx Master
FIG. 21
Novara AxLink KeyPads - Rear Panel Connectors
Power Supply Connector
Novara AxLink KeyPads can be powered by the AxLink bus. Optionally, an external 12V power supply can be used
(FIG. 22).
Power Supply
FIG. 22
Power Supply Connector
If using an external Power Supply, be aware that the Power Supply polarities on
Novara KeyPads are opposite to that of other AMX equipment.
20
The rear panel connector layout is identical for all Novara AxLink KeyPads.
Alternate Button
Numbering DIP Switch
(AxLink port)
AxLink Status LED
Connect the White strip lead to the +VE terminal on the ControlPad
Connect the Black strip lead to the –VE terminal
AxLink Device
Address DIP
Switch
Novara ControlPads & KeyPads