Using Bank Assign To Control Two Projectors - Example - AMX Novara 1000 Series Operation/Reference Manual

AMX Novara DCS1000 Device Configuration Software
9.
Write a script for the Tuner select button including enable Bank X4 in the script (FIG. 98).
FIG. 98 Button 8 script, with Enable X4 Bank selected
The controlpad will now act in the following way.





Using Bank Assign to Control Two Projectors - Example

The following example illustrates using Bank Assign to control two Sony projectors using Volume Up/Down buttons:
1.
Select Button 1 to configure (FIG. 99):
FIG. 99 Button 1 - selected to configure
2.
In the menu bar, select Button > Bank assign. This invokes the Bank Assign options (FIG. 100):
FIG. 100 Button > Bank assign
3.
Select Bank X to enable the button press drop-down menu.
56
When Button 5 is pressed this will activate Bank X1. This means that whenever any button is pressed that is
Bank X assigned the X1 script will run. So for our example, if button 1 is pressed, the DVD Play script will
run. If button 2 is pressed, the DVD Stop script will run.
Now if Button 6 is pressed, Bank X2 will activate, so now if button 1 or 2 is pressed the VCR Play\Stop
scripts will run.
Button 7 will activate Bank X3 and Button 8 will activate Bank X4, hence allowing control of a CD Player or
Tuner.
There are 3 Banks X,Y or Z, so for example, Bank X could be used for a group of buttons with common
Transport functions, Bank Y used for Common Menu functions, etc.
Novara ControlPads & KeyPads