Ir Commands; Opening Ir Library Files; Adding An Ir Command To An Event - AMX Novara 1000 Series Operation/Reference Manual

AMX Novara DCS1000 Device Configuration Software

IR Commands

The ControlPad can be configured to output an IR function on a Button action. All IR functions are contained within a
Library.

Opening IR Library Files

1.
Click the Add IR Function button in the Command Bar to invoke the Select IR Function window, indicating the
currently selected IR Library (FIG. 57).
FIG. 66
Select IR Function window
If the Device to control is in a different IR Library, click the Change Library button and select the library to
display (in the Open dialog).
Novara IR Library files use the file extension *PLR.

Adding an IR Command to an Event

1.
Select the device to control from the Select Device drop-down menu.
2.
Select the desired function from the Select Function drop-down menu.
3.
Select the desired action from the Select Action drop-down menu. Action options include:



When hard-wiring to a device the carrier may have to be turned off, refer to
Manufacturers instructions, otherwise carrier must be left On.
4.
When the IR parameters have been set, click Add to Script to add this IR command to the script (FIG. 67).
FIG. 67 Adding an IR Command to the Script
42
Send IR Pulse sends the IR function 4 times only.
IR Pulse No. allows you to send a function up to 120 times, selectable from a scroll bar.
Send Continuous sends continuous pulses while a button is executed. This action is useful for Volume Up
and Down and Cursor functions.
Novara ControlPads & KeyPads