Deltech Fitness DF820LS Assembly Instructions Manual
  1. Manuals
  2. Brands
  3. Deltech Fitness Manuals
  4. Fitness Equipment
  5. DF820LS
  6. Assembly instructions manual

Deltech Fitness DF820LS Assembly Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ASSEMBLY INSTRUCTIONS FOR THE
DF820LS POWER RACK WITH
LAT ATTACHMENT & 200 LB. WEIGHT STACK
The DF820LS consists of the DF820 Power
Rack and the DF838 Stack Loaded Lat
Attachment
(888) 258-0533
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DF820LS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Deltech Fitness DF820LS

Summary of Contents for Deltech Fitness DF820LS

  • Page 1 The DF820LS consists of the DF820 Power Rack and the DF838 Stack Loaded Lat Attachment (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...
  • Page 2 ASSEMBLY INSTRUCTIONS FOR THE DF820 POWER RACK (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...

  • Page 3: Box Contents

    CHIN-UP BAR QTY 4 QTY 2 QTY 2 QTY 2 QTY 1 DF306 DF820 INSTRUCTIONS HARDWARE QTY 1 QTY 1 *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...
  • Page 4 M12 x 100MM BOLT M12 LOCKNUT RUBBER SHOE RECTANGULAR CAP QTY 14 QTY 12 QTY 4 QTY 4 LOCK PIN QTY 4 *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...

  • Page 5: Frame Assembly

    FRAME ASSEMBLY TOOLS REQUIRED: WRENCHES OR METRIC SOCKET SET ATTACH THE SIDE FRAMES (A) TO THE BOTTOM CROSS MEMBER (B) USING THE M12 x 100MM BOLTS (L), FLANGES (E), AND THE M12 LOCKNUTS (M). NOW ATTACH THE BACK CROSSMEMBER (D) AND THE TOP CROSSMEMBER (C) USING THE M12 x 100MM BOLTS (L), FLANGES (E) &...
  • Page 6 FRAME ASSEMBLY LOCKPIN INSTALLATION INSTALL THE CHIN UP BAR (I) TO THE MAIN FRAME USING THE M12 x 100MM BOLTS (L). INSERT THE RECTANGULAR END CAPS (K) INTO THE TOP OF THE SIDE FRAMES. THEN INSTALL THE RUBBER SHOES (J) . SLIDE THE SPOTTER RODS (H) THROUGH THE SIDE FRAMES AT THE DESIRED HEIGHT AND INSTALL LOCKPINS (N).
  • Page 7 ASSEMBLY INSTRUCTIONS FOR THE DF838 LAT ATTACHMENT (888) 258-0533 FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...
  • Page 8 DF838 DF838 HARDWARE PACK INSTRUCTIONS 200 LB WEIGHT STACK WEIGHT SELECTOR ROD QTY 1 QTY 1 QTY 1 QTY 1 *NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE (888) 258-0533...
  • Page 9 DF838 HARDWARE 4-1/2” PULLEY 3-1/2” PULLEY RUBBER SHOE SNAP HOOK QTY 4 QTY 2 QTY 4 QTY 5 2” x 3” CAP RUBBER DOUGHNUTS CHAIN WEIGHT STACK PIN QTY 1 QTY 2 QTY 1 QTY 1 M10 x 65MM BOLT M10 x 70MM BOLT M10 x 75MM BOLT PULLEY BUSHING...

  • Page 10: Top Frame Assembly

    TOP FRAME ASSEMBLY DO NOT TIGHTEN THESE LOCKNUTS UNTIL AFTER INSTALLING THE CABLE (NOTE: THE NUTS USED ON THIS MACHINE ARE LOCK NUTS, THIS MEANS YOU MUST TIGHTEN THEM DOWN PAST THE PLASTIC INSERT.) TOOLS REQUIRED: ADJUSTABLE WRENCHES OR METRIC SOCKET SET INSTALL THE 3-1/2”...

  • Page 11: Main Frame Assembly

    MAIN FRAME ASSEMBLY DO NOT TIGHTEN THESE LOCKNUTS UNTIL AFTER INSTALLING THE WEIGHT STACK BB CC INSTALL THE TOP FRAME ASSEMBLY ONTO THE BODY (A) USING THE M10 x 70MM BOLTS (X) THE M10 FLAT WASHERS (BB), AND THE M10 LOCKNUTS (CC). DO NOT TIGHTEN THE M10 LOCKNUTS AT THIS TIME.

  • Page 12: Floating Pulley Assembly

    FLOATING PULLEY ASSEMBLY ASSEMBLE THE FLOATING PULLEY ASSEMBLY USING THE 4 1/2” PULLEYS (O), THE 5” FLANGES (F), THE M10 x 55MM BOLTS (Z), THE 10MM FLAT WASHERS (BB), AND THE 10MM LOCKNUTS (CC).

  • Page 13: Final Installation

    FINAL INSTALLATION ATTACH THE LAT ATTACHMENT TO THE POWER RACK USING THE M10 x 75MM BOLTS (W), 4” FLANGE PLATES (G), M10 WASHERS (BB) AND M10 LOCKNUTS (CC). MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM PERIODICALLY TO MAKE SURE THEY ALWAYS STAY TIGHT.

  • Page 14: Lower Frame Assembly

    LOWER FRAME ASSEMBLY INSTALL THE RUBBER SHOES (N) 0NTO THE BOTTOM SUPPORT(E). ATTACH THE BOTTOM SUPPORT (E) TO THE LAT MACHINE USING THE M10 x 70MM BOLTS (X) THE M10 FLAT WASHERS (BB) AND THE M10 LOCK NUTS (CC).

  • Page 15: Weight Stack Assembly

    WEIGHT STACK ASSEMBLY INSTALL THE RUBBER DOUGHNUTS (R) ONTO THE BOTTOM OF THE CHROME RODS (B) , LEAVING APPROXIMATELY 2” PROTRUDING. INSERT THE CHROME RODS INTO THE TWO OUTER HOLES IN THE BOTTOM SUPPORT. ASSEMBLE THE WEIGHT STACK (L) BY SLIDING EACH PLATE OVER THE CHROME RODS (B) AND ON TO THE BOTTOM SUPPORT.
  • Page 16 UPPER PULLEY ASSEMBLY INSTALLATION REMOVE THE M10 NUTS (BB), AND M10 WASHERS (AA) THAT HOLD THE UPPER PULLEY FRAME ASSEMBLY TO THE BODY. INSTALL THE UPPER PULLEY ASSEMBLY (E) TO THE LAT ATTACHMENT USING M10 x 70MM BOLTS (X), M10 WASHERS (BB), AND M10 LOCKNUTS (CC). ATTACH THE UPPER PULLEY ASSEMBLY (E) TO THE CHROME RODS USING 3/8”...
  • Page 17 UPPER CABLE INSTALLATION UPPER PULLEY FRAME REMOVED FOR CLARITY NOTE: UPPER CABLE IS SHORTER THAN THE BOTTOM CABLE FLOATING PULLEY ASSEMBLY INSTALL UPPER CABLE OVER FRONT PULLEY, BACK TO REAR PULLEY, DOWN TO TOP PULLEY OF FLOATING PULLEY ASSEMBLY, UP TO STACK ASSEMBLY PULLEY AND DOWN TO SELECTOR ROD ASSEMBLY.
  • Page 18 LOWER CABLE INSTALLATION INSTALL LOWER CABLE UNDER FRONT PULLEY AND BACK TO REAR PULLEY. CONTINUE UP AND OVER LOWER PULLEY OF FLOATING PULLEY ASSEMBLY. ATTACH 8MM SNAP HOOK TO END OF CABLE AND THEN TO FRAME POLE BRACKET.

  • Page 19: Safety Notice

    USE INSTRUCTIONS: 1) SET WEIGHT HOOKS TO DESIRED HEIGHT AND INSERT LOCK PIN. 2) SET THE SPOTTER RODS TO THE DESIRED HEIGHT AND INSERT LOCK PIN. 3) IF YOU ARE USING A UTILITY BENCH MAKE SURE THAT IT IS POSITIONED IN THE MIDDLE OF THE RACK.
  • Page 20 T-SHIRT ORDER FORM DELTECH FITNESS T - SHIRT SIZES AVAILABLE ARE M-XXL. THE COLOR OF THE SHIRTS ARE WHITE. RED AND BLACK LOGO. ONLY $12.99 DELTECH FITNESS MUSCLE SHIRT SIZES AVAILABLE M-XXL THE COLOR AVAILABLE IS BLACK. RED AND WHITE LOGO.

Table of Contents