Table of Contents
Advertisement
8.1.6 Binning
This tab contains the binning settings.
Figure 8.7: Binning panel
Binning
Enable Binning:
Enables the binning feature.
Binning Bitshift:
0: Sends the 10 LSB of the 12bit binned pixel data. Result is saturated at 1023 (@ 10 bit).
1: Sends bits 10 to 1 of the 12bit binned pixel data. Result is clipped at 1023 (@ 10 bit).
2: Sends the 10 MSB of the 12bit binned pixel data.
Binning is only available when the image has two or more lines (Htot >= 2).
8.1.7 Info
This tab shows camera specific information such as type code, serial number and firmware
revision of the FPGA and microcontroller and the description of the camera interface.
8.1 MV1-D1280-120
67
Advertisement
Table of Contents
