Table of Contents
Advertisement
8 Graphical User Interface (GUI)
Enable Burst Trigger: Enables the burst trigger feature.
Number of Burst Triggers: Set the number of burst triggers.
Burst Trigger Period [ms]: Set the time between the burst in milliseconds.
Burst Trigger Delay [ms]: Set the delay of the burst trigger in milliseconds.
Strobe
The camera generates a strobe output signal that can be used to trigger a strobe. The delay,
pulse width and polarity can be defined by software. To turn off strobe output, set
StrobePulseWidth to 0.
Strobe Delay [ms]: Delay in milliseconds from the input trigger edge to the rising edge of the
strobe output signal.
Strobe Pulse Width [ms]: The pulse width of the strobe trigger in milliseconds.
Strobe signal active low: Define the strobe output to be active high (default) or active low.
62
Advertisement
Table of Contents
